Free Broken Link Finder: How to Find Dead Links, Fix Them, and Turn Them Into Backlinks

Comparison table of free broken link finder tools showing crawl limits and signup requirements

Nobody notices a broken link until it costs them traffic. A page points to a resource that moved three years ago, the link 404s, and nobody notices for a while. Then rankings slip on that section, a landing page stops converting, and somebody finally runs a crawl and finds140 dead URLs staring back at them.

Here’s the thing though: most of those links are easy to find, and fixing them takes less time than people assume. You don’t need a paid suite. A free broken link finder handles the detection, and the fixes are mostly judgment calls.

Let me walk through why these links cause real damage, which free tools are actually worth your time, and the two workflows that matter most.

Why Broken Links Actually Hurt You

There are two separate problems hiding under the same name, and most explanations mush them together.

Outbound broken links are the ones on your own pages pointing to something dead. A visitor clicks, gets a 404, and leaves. Googlebot follows it too — and on a large site, enough of those dead ends will slow down how quickly new content gets crawled and indexed. You’re paying for crawl budget with links that lead nowhere.

Broken inbound links cost more. Someone else linked to a page on your site. That page got deleted, renamed, or restructured without a redirect. The link is still live on their site, still visible, still earning you nothing. No 404 on your end captures the referral. The equity you’d built is simply gone. Most established sites have dozens of these sitting on old URL structures, quietly bleeding.

The Status Codes You Need to Actually Know

Not all broken links are the same, and the right fix depends entirely on what the server is telling you.

Status CodeWhat’s HappeningWhat to Do
404 Not FoundPage doesn’t exist, server isn’t saying it’s permanently goneRedirect to a relevant live page if a replacement exists; leave as 404 if nothing fits
410 GonePage existed and was deliberately removedUse for intentionally retired content — it tells Google to deindex faster than a 404
301 RedirectPermanent move, passes link equityCorrect fix for renamed or relocated content
302 RedirectTemporary moveWrong choice for permanent changes — it delays equity transfer and confuses crawlers
Redirect chainsA → B → C → final URLEvery hop wastes crawl efficiency. Point straight at the destination
500 / 503Server-side failureA hosting or deployment problem, not a content problem. Fix the server first
DNS timeoutDomain doesn’t resolve at allUsually an expired or abandoned site. Remove the link or replace it

The distinction that matters most in practice: 404 means “maybe recoverable,” 410 means “deliberately dead.” WordPress defaults every deleted post to a 404, which means you’re never actually telling Google your intentions. If you retired a piece of content on purpose and have no replacement, serving a proper 410 clears it out of the index faster.

The Best Free Broken Link Finders, Honestly Assessed

There are several ways to find broken links for free, and each one has a specific job. Let me cover the ones worth having in your bookmarks.

Ahrefs Free Broken Link Checker

This is the strongest option for finding broken inbound links — dead pages on your site that other websites still link to. Ahrefs runs a genuinely massive crawl operation and refreshes its index frequently, so it’s finding broken links others miss.

Free limit: You’re working with a sample, not the full picture. The free checker returns a limited set of broken backlinks per domain — enough to spot patterns, not enough to clear a large site entirely. There’s also a toolbar version that flags broken links in the SERP as you browse.

Who should use it: Site owners with established backlink profiles who suspect they’ve lost links during a redesign or migration. Also worth running against competitors — their dead linked pages are outreach opportunities.

Screaming Frog SEO Spider (Free Version)

The desktop crawler every technical SEO has installed. It maps your site, finds broken internal links, flags redirect chains, checks canonical tags, and exports everything to a spreadsheet.

Free limit: 500 URLs per crawl. That’s the whole constraint. For a blog under 500 pages, the free tier is genuinely complete. For an e-commerce catalog with thousands of products, you need to be strategic — crawl folder by folder, or use include/exclude filters to stay under the cap.

Who should use it: Anyone running a full internal audit. This is your primary tool for site health.

Google Search Console

The only source of ground-truth data, because it’s Google telling you what it actually encountered. The Pages report and Coverage report surface “Not found” errors directly, and the URL Inspection tool lets you test a single URL live.

Free limit: None, but it only covers verified properties — your own site and its subdomains.

Who should use it: Everyone, immediately. If you haven’t connected Search Console yet, that’s your first task.

Dead Link Checker

Web-based, zero installation. Paste a URL, get a crawl report. Convenient for a quick answer when you don’t want to open desktop software.

Free limit: Unregistered scans handle smaller sites easily. Larger sites get queued, and the wait can stretch to hours depending on server load. Reports are also less detailed than a desktop crawl, with limited export options.

Who should use it: Fast one-off checks on a specific page or small site.

Check My Links (Chrome Extension)

Highlights every dead link directly on the page you’re viewing, in red. One click, no crawl depth, no waiting.

Free limit: Unlimited in the sense that matters — no caps, no daily counters. It checks one page at a time in real time.

Who should use it: Outreach prospecting. It’s the fastest way to scan a competitor’s resource page for dead outbound links.

Quick Comparison

ToolBest ForFree LimitSignup
Ahrefs Broken Link CheckerFinding broken inbound links, competitor researchSampled results, not full indexNot required for basic lookups
Screaming Frog (Free)Full site-wide internal audit500 URLs per crawlNo signup
Google Search ConsoleGround-truth crawl errors on your siteUnlimited, own properties onlyGoogle account required
Dead Link CheckerQuick single-site or page scansLarge sites get queued; limited exportAccount needed for scheduled scans
Check My LinksReal-time single-page checks for outreachNo caps, one page at a timeNo signup

No single tool covers everything. Screaming Frog gives depth but caps at 500 URLs. Search Console gives truth but only for your own domain. Check My Links gives speed on one page at a time. In practice you’ll run two or three together. If you want to see how these stack up against a broader audit setup, this breakdown of free SEO utilities covers the neighbouring tools worth having installed.

Workflow 1: Finding and Fixing Broken Links on Your Own Site

Step 1 — Pull the raw data (10 minutes)

Start with Google Search Console. Go to Pages, filter by “Not found,” and export the list. Then run Screaming Frog against your domain. Configure it to crawl the whole site, enable the “Response Codes” and “Redirect Chains” report, and export to CSV.

Cross-reference both lists. Search Console tells you what Google already found; Screaming Frog shows you everything currently live, including chains and 404s Google hasn’t crawled yet.

Step 2 — Sort by traffic and links (5 minutes)

Not all dead links deserve attention. Pull in Google Analytics or your Search Console data for the dead URLs and sort by the traffic they used to get. Then check Ahrefs for how many external links point to each one.

Prioritise from there:

  • High traffic + many backlinks → highest priority, you’re losing both
  • High traffic + no backlinks → still worth fixing for conversions alone
  • No traffic, no links → probably fine to leave as 404

Step 3 — Decide the fix for each URL (10 minutes)

This is the part people get wrong. Match the fix to the situation:

  • Content moved or was renamed → 301 redirect to the new URL
  • Content was replaced by a better page → 301 redirect to the replacement
  • Content intentionally retired, no equivalent → serve a 410
  • Just a typo or bad link in your content → update the link itself, no redirect needed
  • Never existed (someone typed a wrong URL) → remove the link entirely

A quick sanity rule: if you redirect a URL to a completely unrelated page, you’ve built a soft404. Google treats it the same as an error page, and you’ve given the user a worse experience than the 404 would have.

Step 4 — Fix redirect chains (5 minutes)

If Screaming Frog shows A → B → C, don’t just redirect A to C. That’s the right move. But also check whether B is linked to internally anywhere — if so, update those internal links to point directly to C. You want one hop, everywhere.

Step 5 — Rescan and verify (5 minutes)

Re-crawl with Screaming Frog. Confirm zero chains remain, and confirm the URLs you redirected now return 301 with the correct target. Check Search Console again in two weeks to confirm Google has re-indexed properly.

Workflow 2: Turning Dead Links Into Backlinks

This is the side most people overlook. Broken links on other websites are free link-building opportunities, because the webmaster who put the link there clearly wanted to cite something and the target vanished.

Step 1 — Find a target page

Put Ahrefs’ Broken Link Checker against a competitor domain in your niche. Look for their pages with the highest number of dead outbound links — usually resource lists, “best tools for X” roundups, statistics pages, or glossary posts. These attract links precisely because they’re useful and linkable, so they tend to accumulate broken references as the web shifts underneath them.

Alternatively, run Check My Links on any high-authority resource page in your niche and see what comes back.

Step 2 — Verify the dead links manually

Don’t trust the scanner blindly. Open each dead URL in a browser and confirm it genuinely 404s or times out. Tools occasionally flag URLs that return a 403 to bots but work fine in a real browser.

Step 3 — Build a genuine replacement

This is where most outreach fails. If the dead link pointed to a statistic, a study, or a tool, you need something that fills the same gap. Not “our page about a related topic” — the actual equivalent. Publishing a comparable resource on your own site takes an afternoon and it’s what makes the pitch work.

Step 4 — Find every site linking to the dead page

Use Ahrefs Backlink Checker or the free version of Moz’s Link Explorer to pull the referring domains for that dead URL. This gives you a list of people already citing it, who are likely to welcome a correction.

Step 5 — Send the outreach email

Keep it short. Something like:

Hi [Name],

I noticed the link to [topic] on your [page name] is no longer working — it returns a 404.

We published [your resource], which covers the same ground: [one line on what it includes].

If it’s a fit, here’s the URL: [link]

Happy to adjust anything.

[Your name]

That’s it. No attachments, no “hope this finds you well,” no paragraph about how your platform is revolutionary. One problem, one solution, one link.

Step 6 — Track and follow up

Roughly 10-20% will respond. Follow up once after a week. If they don’t reply, move on — the link will often get fixed by someone else in the meantime, and you can reclaim that page later.

Mistakes Beginners Make

Panicking over 403s and 999s. LinkedIn, Amazon, Cloudflare-protected sites and most enterprise platforms block automated requests. A 403 doesn’t mean the link is broken — it means a bot asked and got denied. Open it in a real browser before you “fix” anything. A 403 on a link to Amazon.com is perfectly healthy.

Deleting links that aren’t broken. Redirecting every URL that returns an unusual status can do more harm than good. Confirm in-browser first.

Leaving redirect chains in place. A single redirect isn’t a problem. Three hops is wasted crawl efficiency and diluted equity. Fix the chains.

Running a full crawl on a 10,000-page site with the free tier. You’ll hit the 500-URL cap mid-run and get an incomplete picture. Crawl by folder instead, or use the sitemap.

Ignoring the small stuff because there’s a lot of it. 140 broken links feels like a crisis. It isn’t, unless you schedule it. A monthly 30-minute crawl with Screaming Frog keeps the number near zero, which is a far better position than doing a heroic cleanup once a year.

Forgetting that broken inbound links are a real loss. If you redesigned your site six months ago and didn’t map old URLs to new ones, you’re probably still bleeding links. Run Ahrefs’ checker and see what the damage looks like.

Where to LandBroken links are one of the rare SEO problems where the fix is obvious, the tooling is free, and the outcome is immediate. Set up Search Console and Screaming Frog today, run your first crawl, and you’ll have a full picture before lunch.

Leave a Comment

Your email address will not be published. Required fields are marked *